Creating a New Real Browser Check
- Caleb Miller
- Matt Wilkinson
To begin, click on any of the icons within the “Real Browser Checks” section of the “Create New Check” wizard.
Step 1: Name, Description, and Tags
Fill in the name of the check and a brief description if desired. Then add any Tags you wish to associate with the checks.
Step 2: URL, Scenario, and Location
Item | Description | Comment |
|---|---|---|
URL | URL to access. |
|
Browser Version | Browser version to use for the check. | Depending on the version, additional options may be available. |
Scenario | Scenario file. |
|
Location | Locations for the check. | Note: If you select multiple locations, a separate check will be created for each location. |
Buttons
Step 3: Interval, Thresholds & Monitor Groups
In the third step, you can define how often the check is to run, basic reporting settings and add administrative settings.
Frequency
Item | Description | Comment |
|---|---|---|
Frequency | Time between data retrieval. | If set to |
Thresholds
Item | Description | Comment |
|---|---|---|
High Warning Threshold | A warning is triggered above this value. | |
High Error Threshold | Severity level Threshold calculation method and settings. | Error is triggered above this value. |
Low Warning Threshold | Severity level Threshold calculation method and settings. | A warning is triggered below this value. |
Low Error Threshold | Severity level Threshold calculation method and settings. | Error is triggered below this value. |
Treat 3rd party URL as Warning | Errors generated by third party URLs are handled as Severity level events. |
|
Groups
Item | Description | Comment |
|---|---|---|
Monitor Groups | Monitor Groups for the check. |
|
Step 4: Confirm & Create
The final step provides an overview of the check configuration and allows you to create it.
Click Create to add the check and open the Configuration view.
Can't find what you're looking for? Send an E-mail to support@apica.io