With the Browser check wizard (applicable for any browser) you can create a check and configure the basic settingsTo begin, click on any of the icons within the “Real Browser Checks” section of the “Create New Check” wizard.
Step 1: Name
...
In the first step, you can add a check name and relevant information.
...
, Description, and Tags
...
Fill in the name of the check and a brief description if desired. Then add any Tags you wish to associate with the checks.
Step 2: URL, Scenario
...
, and Location
The second step allows you to configure the basic properties
...
Item | Description | Comment |
|---|---|---|
URL | URL to access. | |
Browser Version | Browser version to use for the check. | Depending on the version, additional options may be available. |
Scenario | Scenario file. | |
Location | Locations for the check. | Note: If you select multiple locations, a separate check will be created for each location. |
Buttons
Step 3: Interval, Thresholds & Monitor Groups
In the third step, you can define how often the check is to run, basic reporting settings and add administrative settings.
...
Frequency
Item | Description | Comment |
|---|---|---|
Frequency | Time between data retrieval. | If set to |
Thresholds
Item | Description | Comment |
|---|---|---|
High Warning Threshold | A warning is triggered above this value. | |
High Error Threshold | Severity level Threshold calculation method and settings. | Error is triggered above this value. |
Low Warning Threshold | Severity level Threshold calculation method and settings. | A warning is triggered below this value. |
Low Error Threshold | Severity level Threshold calculation method and settings. | Error is triggered below this value. |
Treat 3rd party URL as Warning | Errors generated by third party URLs are handled as Severity level events. |
Groups
Item | Description | Comment |
|---|---|---|
Monitor Groups | Monitor Groups for the check. |
Step 4: Confirm & Create
The final step provides an overview of the check configuration and allows you to create it.
...